Paint removal example ~ Paste environmentally friendly paint remover CONTROX B 42, compliant with EU REACH regulations!! Three simple steps to remove paint easily!!

Large objects cannot be soaked to remove paint!? Vertical surface paint remover is not easy to apply!？

 

German eco-friendly paste paint remover, compliant with EU REACH regulations, simple three-step process~

 

 

There are many types of paint removers, classified by ingredients into high-toxicity and environmentally friendly types. Environmentally friendly types mainly consist of formulas without dichloromethane and NMP. If classified by form, paint removers can be divided into liquid and paste types. Among them, liquid types are suitable for immersion and heating paint removal processes, while paste types are more commonly used for large workpieces, buildings, or situations where immersion treatment is not possible.

 

Below is an introduction to the steps of using paste paint remover:

 

STEP 1: Apply the paint remover evenly to the object to be treated, and wrap it with cling film or plastic wrap if necessary.

 

STEP 2: The formula of the paint remover will penetrate the gaps between tiny paint molecules and separate the paint from the surface of the object over time.

 

STEP 3: Apply slight pressure with a plastic scraper on the swollen paint surface, then scrape off and rinse away the residue with clean water.

 

▲ Neutral paint remover is gentler and more effective for wood

 

CONTROX B 42 Neutral Paint Remover

 

Application:

 

Used to remove dried coatings and paints, oil-based and greasy dirt, and condensates between coatings. Very suitable for stripping old exterior wall coatings.

 

Features:

 

• Neutral
• Does not contain chlorinated hydrocarbons
• Low volatility and good solubility
• Especially suitable for stripping old paints, coatings, and layers containing oil or grease

​

Usage:

 

• Can be applied with a brush or airless spray gun
• Reaction time is a few hours, depending on the thickness of the coating
• Reaction time can be done overnight
• After penetrating the coating, clean with steam spray or high-pressure equipment

​

Technical Data:

 

• Appearance: Blue paste
• Density: 0.07 g/cm3 (20°C)
• pH: 7-8
• Flash point: 93°C

​

CONTROX B 73 Acidic Paint Remover

 

Application areas:

 

• Used for paint removal of large parts that cannot be processed by immersion processes
• Used for maintenance work on machinery and equipment that cannot be moved from their location
• Used for cleaning spray booths and floors in paint shops

​

Features:

 

• High-viscosity paint remover
• It can even be applied to vertical surfaces without dripping
• It has a good peeling effect on various paints, whether air-dried or baked, such as acrylic paint, polyester paint, epoxy resin paint, etc.

​

Processing:

 

• Apply CONTROX B 73 with a brush or spatula to a thickness of 1-2 mm.
• After the coating separates from the surface, remove it together with the remaining paste-like substance with a spatula and wash the substrate with water.
• In very thick paint layers, CONTROX B 73 may need to be used multiple times.

​

Technical Data:

 

• Appearance: Light yellow paste
• Density: 1.04 (20°C)
• pH value concentration: 1.8
• Flash point: > 100 °C

​

Advantages of CONTROX paint remover

 

Benefits   Achieve the shortest stripping time at the lowest possible working temperature Suitable for all common coatings on various substrates Applicable to immersion and spraying processes in all temperature ranges Also suitable for sensitive surfaces Long service life Organic products can be recycled Does not contain NMP, NEP, and other SVHC according to REACH regulations Expert recommendation