How to reduce VOC (volatile organic compounds): Four environmentally friendly cleaning agents that can be used in general industry and food industry~

We provide superior performance cleaning agents, offering you the best low-VOC cleaning solutions~

 

Due to its sustainable components and reduced solvents, our industrial cleaners are VOC-free and come without hazardous labels. These advantages not only ensure occupational health and safety but also promise significant benefits in terms of reducing operational costs in the mid-term. Benefitting from a wide range of customizable and standard industrial cleaning solutions, they can be applied to various applications.

 

 

CB 100

Water-based / VOC-free / Substitute for solvents (acetone, degreasing oils) / Heavy oil stain removal

 

CB 100 is a low-foam cleaning agent based on renewable raw materials. Its natural active ingredients effectively dissolve contaminants without causing surface depression. It has a pleasant scent, is solvent and VOC-free, and doesn't require labeling according to CLP regulations, making it an effective alternative to solvents or waxes.

 

Additionally, its low foam and long lifespan ensure effective use within closed-loop systems. This cleaner can be used long-term with minimal waste production, protecting not only employees but also the environment. Moreover, it can be rinsed off with water without leaving residues, making it suitable for certain areas in the food industry.

 

• VOC-free
• Nature Boost: Derived from renewable materials
• No labeling required under CLP regulations
• Low foam
• Water-based, solvent-free, and phosphate-free cleaner
• Powerful solvent power and consistently good cleaning performance
• Used for removing strong contaminants such as stubborn oils, rubber traces, asphalt, and wax residues
• NSF certified (Registration number: 146719, Catalog number: C1)

 

 

 

UNO SF

Water-based / Low VOC / Substitute for solvents / Specialized for mechanical cleaning

 

UNO SF Universal Cleaner is specifically developed as a low-foam water-based cleaner for use in automatic cleaning equipment. It can be used for:

 

• High-pressure washing machines
• Ultrasonic systems
• Immersion baths
• Hot water part cleaning machines

 

Alternatively, it can be used manually - just spray and wipe with a cloth or rinse with water. If persistent contamination is present, UNO SF can be used without dilution; otherwise, it is recommended to dilute with water at a ratio of 1:40 - normal application concentrations range between 3-5%. Additionally, UNO SF is highly efficient at ambient temperatures, helping reduce operating costs and minimizing downtime due to bath replacement.

 

UNO SF is gentle on surfaces, making it easy to remove residual oils, resin oils, pigment-based inks, protein residues, and similar contaminants, meaning it can clean sensitive materials. However, it should be avoided on undiluted aluminum or zinc surfaces. Typically, it can be used with a dilution ratio of 1:30 to 1:40 without adverse effects. The product is not considered hazardous during transportation and storage.

 

Furthermore, UNO SF has been NSF certified (Registration number: 144386, Catalog number: A1), making it suitable as a general cleaner in the food industry.

 

Key features:

 

• Water-based alkaline universal cleaner
• Low foam, making it suitable for mechanical applications
• Free from phosphates and reduced solvents
• Highly efficient even at a dilution ratio of 1:40
• Effective in removing oils, greases, protein residues, and colored inks
• Compatible with oil separators, ensuring long bath life
• Demonstrates excellent cleaning performance at ambient temperatures
• NSF certified (Registration number: 144386, Catalog number: A1)

 

 

 

FT Series

Water-based / Low VOC / Fast-drying / Substitutes for degreasing oils and alcohols

 

 

FT 200 (General industrial degreaser/degreasing oil removal)

 

FT 200 can replace toxic solvents, cellulose thinners, and cold cleaning agents. Suitable for powerful cleaning and degreasing, it removes light wax or machine oil contaminants that may hinder painting. It can also remove fingerprints, dust, or fresh adhesive residues.

 

Containing corrosion inhibitors, it provides temporary corrosion protection. Moreover, it evaporates faster than traditional water-based cleaners. Surfaces are thoroughly cleaned with minimal residue. It removes not only oils and waxes but also debris from roller bearings. Due to its VOC reduction and not requiring labeling according to CLP regulations, it is a safer alternative. Its surfactants comply with biodegradability regulations. Its phosphate-free formula is relatively environmentally friendly.

 

Applications:

 

• Suitable for general industrial and paint maintenance cleaning
• Ideal for machine cleaning and maintenance
• Widely applicable in manufacturing and processing industries
• Suitable for CNC metal processing
• Pre-painting cleaning and degreasing
• Effective in removing machine oil, rust inhibitors, light waxes, and debris from roller bearings

 

FT 300 (Electronics residue remover/solder paste)

 

FT 300 dries quickly and leaves no residues at low temperatures, which is particularly advantageous in the electronics field to avoid moisture-induced damage.

 

It can also be used to remove contaminants before labeling, bonding, and polishing. Contaminants on plastics, glass, or metals can be effectively dissolved. It can remove solder paste from templates and scrapers and clear any processing residues such as dust or glue.

 

The cleaner is surfactant-free, VOC-reduced, and non-hazardous during transport, as it doesn't require labeling according to CLP regulations.

 

Applications:

 

• Cleaning various surface materials before further processing or shipment
• Removing solder paste residues on PCBs in the electronics industry
• Removing mold release agents and adhesive residues after applying edge banding in the woodworking industry
• Cleaning synthetic materials, polished surfaces, glass, metal, and all highly polished and glossy surfaces
• Cleaning before polishing, bonding, and labeling
• Dissolving grease and adhesive residues
• Removing fingerprints
• Eliminating mold release agents and adhesive residues in the woodworking industry
• Final cleaning before shipment
• Removing solder paste from templates

 

 

GS 200

Solvent-based / Low VOC / Substitutes for acetone and aggressive solvents / Effective tar and asphalt remover

 

GS 200 dissolves persistent contaminants naturally. Its special advantage lies in its mostly renewable raw material-based components instead of petroleum. These natural ingredients stand out for their strong solvency on persistent contaminants. It completely replaces solvents containing VOCs and/or aggressive substances. A thin layer is sufficient to remove persistent contaminants. It combines optimal performance with employee protection and reduced environmental impact. Highly concentrated cleaners and degreasers are NSF certified for use in the food industry. It effectively removes persistent grease, rust wax, adhesive residues, asphalt, benzyl, silicone, sealants, rubber, persistent carbonization, synthetic materials, and oil decomposition products from roller bearings, worm gears, cylinders, and nozzles. Burnt oil layers dissolve safely and are removed safely from gearboxes and motors. Due to its product characteristics, the cleaner's evaporation rate is slower than conventional solvents. This leads to longer exposure times and high efficiency. It leaves no oily residue on the cleaned surface.

 

With a high flashpoint (> 100°C / 212°F), the grease solvent increases safety during application. Reducing VOCs makes the product's smoke emissions very low during application, meaning low employee exposure and minimal environmental pollution.

 

GS200 is ready for manual application or immersion (also recyclable). Just spray it in a thin layer and wipe with a absorbent cloth after a short exposure. The cleaned surface will have almost no residue.