Industrial cleaning ~ Super concentrated parts cleaner BIO-CIRCLE UNO SF (suitable for high-pressure cleaning machines)!!-Kelly Chemical Electronics Kelly Chemical Electronics
NEWS
2022.04.08

Industrial cleaning ~ Super concentrated parts cleaner BIO-CIRCLE UNO SF (suitable for high-pressure cleaning machines)!!

Patented Formula Design: One Bottle Solves All Stains and Grease

 

Ultra-High Dilution Ratio 40:1 - Economical Choice!!

 

UNO SF is a water-based highly concentrated parts cleaner that employs advanced cleaning technology to deliver outstanding performance. Its exceptional dissolving power enables the product to achieve optimal results at the working temperature of your cleaning equipment. UNO SF features a non-foaming formula, making it ideal for applications where foam may interfere with the cleaning process.

 


▲The low-foam formula of UNO SF is compatible with high-pressure cleaning machines.

 


Features and Benefits:

 

  • High-strength concentrate for economical use
  • Dilutable up to 1:40 to meet all cleaning needs
  • Suitable for manual sprayers, hot parts washers, ultrasonic baths, immersion tanks, floor cleaners, and high-pressure washers
  • Optimal cleaning temperature between 45-65°C (113-149°F)
  • Can be heated up to 90°C (194°F)
  • Removes oil, grease, organic contaminants, paint coatings, markings, smoke, dust, carbon deposits, etc.
  •  Provides corrosion inhibitors to prevent rusting
  •  Water-based, non-flammable
  •  NSF registered under Category Code A1, Registration No. 142609
  •  UNO SF features a non-foaming formula.

 

Usage Instructions:

 

With UNO SF, you can effortlessly remove burnt oil, grease, resin oil, ink, protein residues, and similar dirt without any issues. It is gentle on surfaces, which means it can be used on sensitive materials. However, do not use the concentrate on aluminum surfaces and zinc coatings — for proper surface protection, it is recommended to dilute with water at ratios of 1:30 to 1:40.

 

 

Equipment

Dilution ratio

Dilution %

Application

Material

Manual Sprayer 1:40 -

1:30

2.5% - 3.3%

removal of light organic pollutants

Aluminum and colored alloys, plastic

Manual Sprayer 1:40 -

1:10

2.5% - 10%

removal of light organic pollutants

steel, stainless steel, plastic

Manual Sprayer 1:40 -

pure

10% - pure

removal of heavy organic pollutants

steel, stainless steel

ultrasonic bath

1:40 – 1:30

2.5% - 3.3%

removal of light organic pollutants

Aluminum and colored alloys, plastic

ultrasonic bath

1:40 – 1:10

2.5% - 10%

Removal of light to heavy organic pollutants

steel, stainless steel, plastic

ultrasonic bath

1:10 - pure

10% - pure

removal of heavy organic pollutants

steel, stainless steel

floor scrubber

1:30 – 1:10

3.3% - 10%

floor maintenance and degreasing

Tile floor, hardwood floor, concrete, epoxy coated floor, oilcloth etc.

pressure washer

1:40 – 1:30

2.5% - 3.3%

pressure washing

aluminum truck body, floor, wall, vinyl siding

pressure washer

1:30 – 1:20

3.3% - 5%

pressure washing

Truck and body, floor, wall , vinyl siding etc.

heated pressure washer

1:40 – 1:30

2.5% - 3.3%

Cleaning and degreasing parts with minor organic contamination

Aluminum and colored alloys, plastic

heated pressure washer

1:40 – 1:10

2.5% - 10%

Cleaning and degreasing parts with light to heavy organic contamination

steel, stainless steel, plastic

heated pressure washer

1:10 - pure

10% - pure

Cleaning and degreasing parts with significant organic contamination

steel, stainless steel

immerse

1:10 - pure

10% - pure

Soaking light and heavy organic contaminants

steel, stainless steel

 

Application Industries:

 

  • Used for maintaining engine and gearbox (automobiles, motorcycles, motors).
  • Removing sawdust, dust, resin, etc., from chains and conveyors (in sawmills).
  • Note: Do not use high-concentration UNO-SF on aluminum and zinc coatings.
  • Fully adopted by the world's largest printing press manufacturer, Heidelberg Germany, for cleaning flat screens and rotary printing presses, screens, and templates (in the printing industry).

  • Suitable for various cleaning applications such as parts cleaning and degreasing (in the mechanical and metalworking industries).

  • Useful for cleaning any part (in restaurants or kitchens), but especially effective for removing stubborn stains around exhaust systems and around the ceiling and walls around stoves, which cannot be easily removed with conventional cleaners.

  • (In the plastic industry) Very useful for removing release agents and plastic residues from tools and molds, as well as for cleaning, and is used frequently.

 

Application Examples:

 

1.High-pressure cleaning of large metal components.

 

 

2.High-pressure cleaning of large heavy machinery.

 

 

3.Manual wiping and cleaning of factory equipment appearance.

 

諮詢窗口
公隆化學股份有限公司
電子科技事業處
TEL:(02)2762-1985 ext 11200



Kelly's Newsletter~ New Information for you !!

5G low dielectric materials: In the application field of 5G, materials with low dielectric properties have attracted much...(More)

Bio epoxy resins: Under the corporate spirit of all parties seeking ESG, bio-based epoxy resin has low-carbon...(More)

Facebook(另開視窗) 撥打電話+8860227621985 寄信至helpdesk@es-kelly.com